MSI MAG Forge 100R Gaming PC Case – Black | ATX/M-ATX/Mini-ITX Compatible | Tempered Glass, Magnetic Dust Filter | Mystic Light RGB | 3X 120mm Fans…

Il case e economico carino robusto e ben fatto tutti gli alloggi perfetti ed esce gia con 3 ventole( 2 anteriori rgb e 1 posteriore nn rgb) ha il tasto anteriore per cambiare colorazione alle ventole ottimo airflow….
Ma ora passiamo alla pecca il problema e il vetro che dicano sia temperato probabilmente temperato male perche appena messo la seconda volta e scoppiato in mille pezzi rischiando di incastrarsi nella scheda video e altri componenti fortunatamente nessuno si e fatto male mi e esploso letteralmente vicino al volto siccome lo stavo avvitando e neanche facendo una pressione elevata (ho risolto con un pannello di plexiglass da 4 euro) assistenza purtroppo nn buona dovevo rispedire e quindi rismontare l intero pc per un pannello di vetro mi aspettavo meglio da una marca cosi blasonata!!!

Je cherchais une tour pour passer le pc de mon fils d’un format micro ATX à un format ATX
Quelque chose qui permet un bon refroidissement, avec un look sympa et dans un prix contenu.
Tout semble être coché avec cette tour, elle semble de bonne qualité (verre trempé, ventilo RGB, …), comme souvent maintenant l’alimentation se trouve dans la partie inférieur de la tour, avec deux emplacement pour HDD 3,5. Il est facile de cacher les câbles, afin d’avoir une tour propre et épurée (pour ceux qui comme moi n’aime pas voir les câbles).
La photo a été faite en cours de montage, donc le câblage (notamment du CGU) n’est pas parfait.

Space is good enough for any motherboard. You can install 2 HDDs and 3 SDDs. 2 fans pre installed with an ARGB controller hub that can control 6 fans in total. Fan at the back is Non RGB but you can swap it out if you want an RGB one. You can install an addiditional Fan at the front , preferably a Non RGB one cause it wont be visible due to the unique design anyways. The front design is unique and looks like a Gaming rig compared to others. Just go for it. You wont regret it.

just search this model number on YouTube…their are many reviews about this product …its a very refined product

3 inbuilt fans. 2 argb + 1 normal. Included argb controller.

Full mesh in front so no problem in cooling your heavy GPU with heavy cpu. Side tempered glass quality very good. I am fully satisfied with the product

As good as most Mid sized ATX cases around and great value at this price.
Pro’s: Excellent cooling thanks to the full mesh front & top, plenty of room for fans (or rads). Plenty of room for a large CPU cooler, I installed the ID Cooling ARGB cooler which is offset so doesn’t block any RAM slots and it does an excellent cooling job.
Enough room for large PSU, but if mor room needed then removal of HDD tray provides masses of room. You’ll still be able to install 1 or 2 HDDs in the bottom should you wish once PSU is installed by simply sliding them into the leftover space and securing with some foam strips, or even a modded drive caddy, they’ll never be on show so it doesn’t need to look pretty and best of all I could fit 4 x SSDs into the space with no issues.
Front fans came fitted to outside of case just behind the front mesh, however I found that they’ll easily fit to the inside as there’s plenty of room. This is far better as the screws then go in from the front making fitting & removal far easier than trying to get at the screws from inside once the other components are in place. It places the fans closer to the components meaning stronger airflow where needed. It creates an air chamber behind the front mesh panel where you can install another fine mesh dust filter should you wish, that doesn’t affect the front RGB as long as you use the correct mesh. I’ve also noticed that more dust seems to get trapped in the front mesh since moving the front fans to the inside due to being a less powerful suction directly behind the mesh, there’s certainly been less dust inside than before.
The front panel easily unclips allowing for quick and easy cleaning when needed.
Cons: The PCIe screw & access slot cover plate is a pita, vase should have threaded hole & plate elongated for easy adjustment and/or removal.
The PCIe slot blanks are snap out disposables, remove the wrong ones, move cards around, or no longer need a card and you’ve only got 2 spare normal slot blanks supplied, need any more and you’ll need to try to find some that fit. Why not just supply 5 more reusable blanks making 7 in total already fitted to the case, it would’ve taken less metal than 1 blank to do !
The glass side is too dark for my likes, it blocks out too much light from the ARGBs, would be better if clear, RGBs can often be dimmed if needed, or film is cheap & easy to install should anyone want it, and you could swap and change shade as you wished.
Would’ve prefered a raised lip to slot bottom of glass side panel into, when screws are removed there’s nothing to help support it so you need to be careful it doesn’t slip and hit the deck if removing whilst case is upright, would’ve only needed 2 screws for top also.
The ARGB controller only partially worked for a few minutes before frying the 2 front fan RGBs. It never worked using the case front panel button and shortly after turning the PC on the RGBs failed on both front fans. Now I also had 3 EZDIY ARGB fans hooked up which fortunately didn’t blow, so either the MSI ARGBs are cheap & nasty, or the controller fault only managed to cook fans connected to No1 + No2 before completely burning out. Tested the controller and it’s completely dead, same for RGBs on MSI fans, but third party fans & LED strips still going strong.
My Mobo only has 1 5v ARGB (Asus Tuf Z-490) so I connected a 4 way splitter and 3 fans + 2 strips all work perfectly with full M/Board control. I spoke to seller Scan about blown fans & controller but it was past their 30 day return window as I’d been to busy to sort it earlier. SCAN WERE GREAT, they contacted MSI regarding the issue and arranged for replacement fans to be sent to me directly from MSI. I’m not sure if they even told them about the controller as no replacement was sent for that, however I’d told Scan that the fans were all that mattered to me so no doubt that’s all they asked for, but MSI actually sent me a set of 3 new ARGB fans so that’s a win in my opinion.
No front panel USB-C or T-Bolt, for another £10 those would be perfect additions, I’ll probably buy a cheap panel with those sockets and leads and strip em down to mod the front panel, as I do use those connections often.
Well I’ve gone on slightly longer than I intended with this review but wanted to get as much info in as possible, so despite 1 perfectly sorted issue & some personal grumbles I can certainly recommend this case, there’s more than enough room for a powerful PC build with great airflow and strong cooling, some easy modification options, and apart from the dark glass it looks great.