Pre-installed: 3×120mm ADD-RGB fans (CF120) at front.
1 year warranty
Specification: DEEPCOOL MATREXX 55 V3 ADD-RGB WH 3F Mid-Tower EATX ABS Computer Cabinet/Gaming Case – White with 3x120mm ADD-RGB Fans at Front, Supports…
Brand
DeepCool
Manufacturer
Deepcool
Model
MATREXX 55 V3 ADD-RGB WH 3F
Model Name
MATREXX
Product Dimensions
44.6 x 21.01 x 47.9 cm, 7.39 Kilograms
Item model number
MATREXX 55 V3 ADD-RGB WH 3F
Computer Memory Type
DIMM
Mounting Hardware
Cabinet
Batteries Included
No
Batteries Required
No
Number of Ports
3
Total USB ports
3
material
Acrylonitrile Butadiene Styrene (ABS)
Country of Origin
China
Item Weight
7 kg 390 g
9 reviews for DEEPCOOL MATREXX 55 V3 ADD-RGB WH 3F Mid-Tower EATX ABS Computer Cabinet/Gaming Case – White with 3x120mm ADD-RGB Fans at Front, Supports…
This is a compact and well designed micro ATX case that comes with a rear case fan (3 pin only, no PWM), cable management space (approx. 1.5 cms) with cutouts on the left hand side, facility to mount a single 2.5 inch and multiple 3.5 inch SATA drives, dust covers and ventilation grills on front panel and bottom panels and a single USB3.0 and USB2.0 port on the front. It covers the basics for a no frills build and we have the option of mounting a case fan up front (not included, bought separately) for intake in the front and exhaust at the back. Cutout for CPU power cable not provided. Cable management is ok, not bad and not great. Gamers, note that it can accommodate graphics card of length up to 25cm only. Anything longer than that will require the 2.5/3.5 inch bay to be cut and removed
The airflow is good, with silent operations and temperatures within acceptable range, for a basic build without separate GPU. With GPU your mileage may vary
Edit: added a GTX1650 Super GPU. Installation was moderately easy. So far so good
The only downside to this case is that there is minimal facility for cable routing and management. It doesn’t affect airflow but is really messy
Edit: would recommend deepcool matrexx SI 40 instead as it has better airflow, easier build capability and cleaner cable management
Edit: After 2 months of use can confidently say that this case has poor thermal performance. keeping the side of the case open leads to a temperature drop of 5-7 degree C. If you plan on running heavy loads this case is not advisable. reduced to 3 stars
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
HILTON –
1. Simple looking, Build quality okay, not premium. 2. Good looking from the side, front is average. 3. Nice and thick Glass, slightly black tinted. 4. Front ports are a bit wobbly, the whole front panel is a bit flimsy, wiring is exposed, could’ve been far better.
*Overall it’s okay, far better than other non-premium brands yet could’ve been beter.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
YounoShinn –
Produit vite livré, pas du tout déçu très épuré et le blanc lui donne un bon look
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Michiel –
La torre es cómoda, de tamaño adecuado, caben todos los componentes, se organizan los cables muy bien y refrigera correctamente. Lo único que no me ha gustado es la alimentación de los 3 ventiladores incorporados, pues es tipo Molex y por tanto no se pueden conectar a la placa ni regular la velocidad. Al funcionar siempre al máximo son algo ruidosos, así que he tenido que comprar aparte unos ventiladores regulables. Es un detalle que debería incluirse en la descripción.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Michiel –
Mesmo sendo do Padrao MicroATX tem um ótimo espacos para organizar os cabos, Recomendo com Certeza Alem dessa frente em Mesh e a lateral em Vidro temperado Deixaram o Designer sensacional
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Prakhar Choubey –
I’ve had the opportunity to use the DEEPCOOL MATREXX 55 MESH ADD-RGB 4F Mid-Tower Tempered Glass CPU case, and I’m genuinely impressed. This case not only looks stunning with its mesh front panel and tempered glass side panel, but it also fits comfortably within a budget. The added RGB lighting provides a decent touch of style that complements the overall design.
I’ve used a full ATX board in this case without any issues, making it versatile and accommodating for larger components. The case’s spacious interior and sturdy build further contribute to its practicality.
Cons: One downside to consider is that the tempered glass side panel demands cautious treatment due to its fragile nature.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Fabulous –
The case is pretty lightweight, so the metal is not super thick, but it’s not like the really cheap cases either. The build quality is actually pretty decent. The glass panel has protecting foil on both sides, so that is well protected.
For those using 3,5″ mechanical drives, you can only place one of them in a cage hidden beneath the PSU shroud and there is no anti-vibration system to keep it from resonating throughout the case. You can mount up to 4 2,5″drives, although if you want to access the screws for the ones behind the motherboard, you will need to remove the mainboard! No exactly ideal.
There is enough space behind the mainboard tray to do a little bit of cable management and you do also get a few tie wraps in the package, along with a bunch of screws. They even included black screws for up to 3 additional fans (The case comes with 1 silent 120mm fan). You can only use a 120mm fan in the back. For the top, you can mount 2 140mm fans, or 2 120s, or equivalent 240/280mm radiators, which is quite nice that there’s actually enough space for those. In the front, you can mount 3 120mm fans, or 2 140mm fans. There is also a cutout in the PSU shroud, allowing for a radiator mount, however, I doubt you can use both a 360mm and a 240/280mm at the same time. I personally wouldn’t use this case for more than one radiator anyway, nor do I like vertically mounted radiators, as they are often set up for intake, meaning you blow the warm air inside the case, which makes little sense to me.
Anyway, I built a nice little gaming PC with this, that I will sell on. Next time, if I am going to use this same case (for another micro-ATX build) I might just choose to go for the RGB version. Now I have bought a pack of white fans, to complete the look with the black and white graphic card theme, without using any RGB. Speaking of which, if you do want to add RGB light strips, you can mount one at the top, however, you cannot put one in the small space in between the glass and the PSU shroud. The space is not wide enough, so I’d advise to stick with RGB fans for the lighting, or maybe just get one small RGB strip up top.
Another thing to mention, speaking of ‘up top’ is that the HDD LED (There is no power LED) has no ‘shielding’ on the back, which means not only do you see it outside, on top of the case, but it also flickers on the inside of the case in bright white. I used a bit of black tape to cover that up.
When mounting your motherboard, also look out that you remove any unneeded stand-offs! There is one in place, for the smaller Micro-ATX boards, that WILL make a short, if you forget to remove it with the larger sized Micro-ATX boards!
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
aniket bhattacharyea –
In short: Value for money. Sleek and aesthetic. Definitely go for it if you’re on a budget.
In details: The packaging was good. It came in its own DeepCool package and then one more layer of Amazon package.
The temperatures are pretty good. It is around 40-50 for me. But I don’t game so your mileage might vary. The looks are superb in this price point and very much build friendly.
Pros: 1. The tempered glass on the side and front adds to the aesthetics. It looks amazing! 2. Comes with 3 ARGB fans (CF120) installed and an ARGB strip. So if you have a motherboard with ARGB headers, you can control the lights with your motherboard. Unfortunately I do not have such a motherboard so can’t tell how it works. (P. S. In my pictures, I moved the preinstalled fans to the top and back. The front fans in my picture are not the preinstalled ones) 3. The case and LED controller with some built-in effects including static colors, breathing effect, sliding and rainbow effects. I connected 7 things (6 fans and the LED strips) to it and worked without a hiccup. 4. It has a bottom mounted PSU and a PSU shroud to put all your extra cables in. 5. It has a hard drive cage with two slots which is compatible with both 3.5″ and 2.5″ drives. You also get two additional 2.5″ slots beside the motherboard. The hard drive cage can be moved (although only about a cm or so) 6. The cable cutouts are intelligently placed and I didn’t have any problem routing the cables. 7. Comes with a lot of zip ties to help you in cable management. 8. Has about 23mm clearance at the back so you can shove a lot of cables there. You can even put fan hubs or led hubs at the back. 9. Magnetic dust filter on the top 10. The top fans can be slid sideways and has 3 parallel slots so that you can adjust them to you liking. 11. The fan at the back also has 3 slots to install for adjustment.
Cons: 1. The first and foremost problem is the instruction manual. It’s basically worthless. It just had a few diagrams with labels and that’s it. The instructions are really unclear. It took me 15 minutes to figure out how to take off the front panel, and took me half an hour to connect the fans’ led strips. If you do not have PC building experience you might run into problems. 2. All the screws came in the same pouch. It’d really help if they had different screws in different pouches. Again, this would not be an issue if the instructions were clear. It’s really difficult to tell which screw goes where unless you have some idea. 3. The unit I received had one bent thumb screw slot on the side panel which caused the screw to sit in an angle on the glass and took real force to unscrew and I scratched my finger. It’s also terrifying because you might break the glass if you put too much force. I’d have liked a window like system instead of the thumb screw business. Also, the glass has no border, so don’t drop it. Be careful!! 4. The front panel is on the top right. So you have to stretch your hands quite a bit to reach them. It also has only one USB 3.0 and 2 USB 2.0. I’d like if it were all USB3 to be honest, but in this price point, I’ll let it pass. 5. The PCI extension slots are non reusable. You have to break them up in order to use them and you can’t put them back. Also, make sure you remove them before inserting the motherboard as you have to go back and forth to remove them. 6. The dust filter at the bottom is not magnetic and you have to slide it out of the cage. Minor inconvenience. 7. Having a glass front panel means you’d have a little drop in the airflow. Probably very negligible. 8. I’d liked it if the LED controller had more effects. The built in ones are good. But very little in number. Not a problem if you have an ARGB motherboard. 9. The drive installation is not toolless. You have to screw them in.
Overall verdict: Go for this case if you are on a budget. Even if you’re not on a budget this is a superb case. Although if you are a beginner, you might get a little bit of trouble, just a little. If you’re stuck at a problem, feel free to contact me at aniketmail669@gmail.com
Ravisekhar Sakthi –
空冷cpuサイドフロー型で、殆どのケースは160mm対応の中、167mm対応。
assassin3使用者も安心して購入できる！
かつグラボがどんどん長くなりrtx4080などは32cm超えで、普通のケースには収まらなくなってきていますが、このケースはなんと37cmまで対応可能。
この2つの条件を備えているケースは根こそぎ値段が高いものが多いが、その中でこのケースはＰＣケースとしては手が届く範囲！
かつLEDの装飾もそれなりに凝っていて見た目的にも妥協がない。
組み立て始めると、細部の作りもしっかりしていて、安いケースはスペーサーが硬すぎたり、ネジ穴が微妙に合わなかったりするが、この商品は特にそのような事もありませんでした。
また、よくよく考えるとLEDファンが3つ搭載されていますが、これ、普通に購入すると3つで六千円くらいします。
それも踏まえるとめちゃくちゃコスパ良いいのでは無いでしょうか！
aniket bhattacharyea –
This is a compact and well designed micro ATX case that comes with a rear case fan (3 pin only, no PWM), cable management space (approx. 1.5 cms) with cutouts on the left hand side, facility to mount a single 2.5 inch and multiple 3.5 inch SATA drives, dust covers and ventilation grills on front panel and bottom panels and a single USB3.0 and USB2.0 port on the front. It covers the basics for a no frills build and we have the option of mounting a case fan up front (not included, bought separately) for intake in the front and exhaust at the back. Cutout for CPU power cable not provided. Cable management is ok, not bad and not great. Gamers, note that it can accommodate graphics card of length up to 25cm only. Anything longer than that will require the 2.5/3.5 inch bay to be cut and removed
The airflow is good, with silent operations and temperatures within acceptable range, for a basic build without separate GPU. With GPU your mileage may vary
Edit: added a GTX1650 Super GPU. Installation was moderately easy. So far so good
The only downside to this case is that there is minimal facility for cable routing and management. It doesn’t affect airflow but is really messy
Edit: would recommend deepcool matrexx SI 40 instead as it has better airflow, easier build capability and cleaner cable management
Edit: After 2 months of use can confidently say that this case has poor thermal performance. keeping the side of the case open leads to a temperature drop of 5-7 degree C. If you plan on running heavy loads this case is not advisable. reduced to 3 stars
HILTON –
1. Simple looking, Build quality okay, not premium.
2. Good looking from the side, front is average.
3. Nice and thick Glass, slightly black tinted.
4. Front ports are a bit wobbly, the whole front panel is a bit flimsy, wiring is exposed, could’ve been far better.
*Overall it’s okay, far better than other non-premium brands yet could’ve been beter.
YounoShinn –
Produit vite livré, pas du tout déçu très épuré et le blanc lui donne un bon look
Michiel –
La torre es cómoda, de tamaño adecuado, caben todos los componentes, se organizan los cables muy bien y refrigera correctamente. Lo único que no me ha gustado es la alimentación de los 3 ventiladores incorporados, pues es tipo Molex y por tanto no se pueden conectar a la placa ni regular la velocidad. Al funcionar siempre al máximo son algo ruidosos, así que he tenido que comprar aparte unos ventiladores regulables. Es un detalle que debería incluirse en la descripción.
Michiel –
Mesmo sendo do Padrao MicroATX tem um ótimo espacos para organizar os cabos, Recomendo com Certeza Alem dessa frente em Mesh e a lateral em Vidro temperado Deixaram o Designer sensacional
Prakhar Choubey –
I’ve had the opportunity to use the DEEPCOOL MATREXX 55 MESH ADD-RGB 4F Mid-Tower Tempered Glass CPU case, and I’m genuinely impressed. This case not only looks stunning with its mesh front panel and tempered glass side panel, but it also fits comfortably within a budget. The added RGB lighting provides a decent touch of style that complements the overall design.
I’ve used a full ATX board in this case without any issues, making it versatile and accommodating for larger components. The case’s spacious interior and sturdy build further contribute to its practicality.
Cons:
One downside to consider is that the tempered glass side panel demands cautious treatment due to its fragile nature.
Fabulous –
The case is pretty lightweight, so the metal is not super thick, but it’s not like the really cheap cases either. The build quality is actually pretty decent. The glass panel has protecting foil on both sides, so that is well protected.
For those using 3,5″ mechanical drives, you can only place one of them in a cage hidden beneath the PSU shroud and there is no anti-vibration system to keep it from resonating throughout the case. You can mount up to 4 2,5″drives, although if you want to access the screws for the ones behind the motherboard, you will need to remove the mainboard! No exactly ideal.
There is enough space behind the mainboard tray to do a little bit of cable management and you do also get a few tie wraps in the package, along with a bunch of screws. They even included black screws for up to 3 additional fans (The case comes with 1 silent 120mm fan). You can only use a 120mm fan in the back. For the top, you can mount 2 140mm fans, or 2 120s, or equivalent 240/280mm radiators, which is quite nice that there’s actually enough space for those. In the front, you can mount 3 120mm fans, or 2 140mm fans. There is also a cutout in the PSU shroud, allowing for a radiator mount, however, I doubt you can use both a 360mm and a 240/280mm at the same time. I personally wouldn’t use this case for more than one radiator anyway, nor do I like vertically mounted radiators, as they are often set up for intake, meaning you blow the warm air inside the case, which makes little sense to me.
Anyway, I built a nice little gaming PC with this, that I will sell on.
Next time, if I am going to use this same case (for another micro-ATX build) I might just choose to go for the RGB version. Now I have bought a pack of white fans, to complete the look with the black and white graphic card theme, without using any RGB.
Speaking of which, if you do want to add RGB light strips, you can mount one at the top, however, you cannot put one in the small space in between the glass and the PSU shroud. The space is not wide enough, so I’d advise to stick with RGB fans for the lighting, or maybe just get one small RGB strip up top.
Another thing to mention, speaking of ‘up top’ is that the HDD LED (There is no power LED) has no ‘shielding’ on the back, which means not only do you see it outside, on top of the case, but it also flickers on the inside of the case in bright white. I used a bit of black tape to cover that up.
When mounting your motherboard, also look out that you remove any unneeded stand-offs! There is one in place, for the smaller Micro-ATX boards, that WILL make a short, if you forget to remove it with the larger sized Micro-ATX boards!
aniket bhattacharyea –
In short: Value for money. Sleek and aesthetic. Definitely go for it if you’re on a budget.
In details:
The packaging was good. It came in its own DeepCool package and then one more layer of Amazon package.
The temperatures are pretty good. It is around 40-50 for me. But I don’t game so your mileage might vary.
The looks are superb in this price point and very much build friendly.
Pros:
1. The tempered glass on the side and front adds to the aesthetics. It looks amazing!
2. Comes with 3 ARGB fans (CF120) installed and an ARGB strip. So if you have a motherboard with ARGB headers, you can control the lights with your motherboard. Unfortunately I do not have such a motherboard so can’t tell how it works. (P. S. In my pictures, I moved the preinstalled fans to the top and back. The front fans in my picture are not the preinstalled ones)
3. The case and LED controller with some built-in effects including static colors, breathing effect, sliding and rainbow effects. I connected 7 things (6 fans and the LED strips) to it and worked without a hiccup.
4. It has a bottom mounted PSU and a PSU shroud to put all your extra cables in.
5. It has a hard drive cage with two slots which is compatible with both 3.5″ and 2.5″ drives. You also get two additional 2.5″ slots beside the motherboard. The hard drive cage can be moved (although only about a cm or so)
6. The cable cutouts are intelligently placed and I didn’t have any problem routing the cables.
7. Comes with a lot of zip ties to help you in cable management.
8. Has about 23mm clearance at the back so you can shove a lot of cables there. You can even put fan hubs or led hubs at the back.
9. Magnetic dust filter on the top
10. The top fans can be slid sideways and has 3 parallel slots so that you can adjust them to you liking.
11. The fan at the back also has 3 slots to install for adjustment.
Cons:
1. The first and foremost problem is the instruction manual. It’s basically worthless. It just had a few diagrams with labels and that’s it. The instructions are really unclear. It took me 15 minutes to figure out how to take off the front panel, and took me half an hour to connect the fans’ led strips. If you do not have PC building experience you might run into problems.
2. All the screws came in the same pouch. It’d really help if they had different screws in different pouches. Again, this would not be an issue if the instructions were clear. It’s really difficult to tell which screw goes where unless you have some idea.
3. The unit I received had one bent thumb screw slot on the side panel which caused the screw to sit in an angle on the glass and took real force to unscrew and I scratched my finger. It’s also terrifying because you might break the glass if you put too much force. I’d have liked a window like system instead of the thumb screw business. Also, the glass has no border, so don’t drop it. Be careful!!
4. The front panel is on the top right. So you have to stretch your hands quite a bit to reach them. It also has only one USB 3.0 and 2 USB 2.0. I’d like if it were all USB3 to be honest, but in this price point, I’ll let it pass.
5. The PCI extension slots are non reusable. You have to break them up in order to use them and you can’t put them back. Also, make sure you remove them before inserting the motherboard as you have to go back and forth to remove them.
6. The dust filter at the bottom is not magnetic and you have to slide it out of the cage. Minor inconvenience.
7. Having a glass front panel means you’d have a little drop in the airflow. Probably very negligible.
8. I’d liked it if the LED controller had more effects. The built in ones are good. But very little in number. Not a problem if you have an ARGB motherboard.
9. The drive installation is not toolless. You have to screw them in.
Overall verdict: Go for this case if you are on a budget. Even if you’re not on a budget this is a superb case. Although if you are a beginner, you might get a little bit of trouble, just a little. If you’re stuck at a problem, feel free to contact me at aniketmail669@gmail.com